Stacker RSS100

Mar 16, 2020

Revimac

News

0

The intelligence with strength, Industry 4.0 ready

When the intelligence matches the strengthen, the elegance of reliable movements follows through the precision of the containers handling at variable speed.

The three axis Servo Stacker RSS100 is definitely Revimac’s finest and Revimac has just released a recent update consisting in new gearbox and servo motors to suit a major update on software interface. This update is now granting a speed up to 22 cycle per minutes.

Servo Stacker RSS100 is based on a three-axis scheme. The combined motion of the three brushless servomotor, operate a movement very close to human arm and forearm motion, and allows to operate approaching, pursuit, loading, and back cycle always maintaining a full control in each phase. Trough the user-friendly interface it will be intuitive for the personnel to customize curves and movement profiles to fit to any type of glass container.

The push bar on RSS100 Servo Stacker could be safely replaced and very quickly thanks to its dedicated “bar change” cycle which fold back the arms and rotate the main beam of 90° getting the bar in easy position for its maintenance. With the machine in this position, the space in front of the annealing lehr is completely free, allowing cleaning and maintenance operations not only for the stacker, but also for cross conveyor and annealing lehr.

SELF LEARNING CONTROL SYSTEM

With the new self-learning function, the stacker will automatically manage the loading profile with few inputs and phase the loading curve by detecting the speed of the IS machine.

The control cabinet (to be placed inside the air-conditioned control room) contains the Motion Controller that is connected to an industrial PC which functions as an HMI (touch screen 15”).

The main characteristics of the operator interface are:
• Preview loading curve simulation
• Simplified management of the loading curve by setting 4 commands only (approach speed, pushing speed, start and end position)

TECHNICAL DETAILS

• MAX. NUMBER OF CYCLES: 22/min.
• SPEED LIMIT: 1200 mm/sec.
• MAX. WARE HEIGHT: 500 mm.
• MAX. PURSUIT STROKE: 1000 mm.
• MAX. LOADING STROKE: 500 mm.
• POSITION ACCURACY: top speed 0,9 mm.
• POSITION ACCURACY: low speed 0,5 mm.

Post by Revimac Revimac

Comments are closed.