Archive for the
‘News’ Category

During last month of August Revimac successfully perform a section boxes exchange among other upgrades to Verescence a at their La Granja plant in Spain. Verescence technical and specialist Teams together with Revimac supervisors, did a great job during the installation and start-up of the machines, respecting the project schedule of the customer.  

2 December 2021

0

To continue the collaboration between Revimac and Verallia, we had the chance to be selected for an ambitious project delivered to Verallia Lagnieu plant. During the second quarter of this years, Revimac accomplished the exchange of section boxes and the supply of a complete IS machine. For both projects the customization has been a key aspect, in particular for the [...]

14 October 2021

0

In September 2021, two hot coating treatment hoods were successfully installed at one of Revimac's long-standing customers, SGC Solution in Korea. The two hot coating hoods were installed on the production lines by the customer and the Revimac supervisor was present on-site during the start-up and commissioning of the units. The on-site activities took place [...]

1 October 2021

0

On august 2021, Revimac has been installed and commissioned the stackers and hot end coating hoods to Siam Glass Rojana. The units have been supplied under a contract signed by Bottero and the customer. Four stackers RSS 100 three axis and four hot end coating hoods HTH 200 have been installed and started in production with [...]

10 September 2021

0

We are proud to inform that two I.S. machines 10 sections, including feeders, have been installed and started in production at our customer Frigoglass (Beta Glass Plc.) at Agbara - Nigeria. The plant start producing bottles at the beginning of June 2021. Despite all the problems and delays due to the Covid situation, technicians and [...]

6 September 2021

0

Siam Glass Rojana, signed last year a contract with Bottero for the supply of I.S. machines 12 sections, for high productions: for these machines, Revimac supplied the ON-OFF mold cooling systems and articulated hoists. In the same contract, Revimac supplied also four stackers RSS 100 and four hot end coating hoods HTH 200 equipped with [...]

12 July 2021

0

Revimac has been involved by iPROTec GmbH, at the end of 2020, in a project to produce a spout servo-feeder for specific applications of the tableware industry . iPROTec GmbH, as engineering company of Zwiesel KristallGlas Group (formerly Schott Zwiesel) top manufacturer in the segment of high-class glass stemware segment, is active in all the [...]

17 May 2021

0

Revimac have got a long-time engagement with Verallia, especially in Italy and France and last year was no exception with Revimac service crew deployed at Verallia Cognac plant where, during the furnace rebuild last fall, the reconditioning of many crucial components like feeders, forming mechanisms and ware handling equipment with many other upgrades to the [...]

12 April 2021

0

WATCH THE VIDEO! https://youtu.be/8o_byN6QU2A Revimac realized the new XHS 700 High Performance Ware Transfer, capable of transferring articles from primary conveyor to cross conveyor up to a speed of 950 bottles per minute, depending on the container dimensions. The new design is based on a double belt conveyor drive with a short auxiliary belt, that [...]

6 April 2021

0

Dear Reader, please be aware this is not the beginning of a fairy tale or the incipit of a romantic novel, but just one episode of a continuing saga that keeps steadily going on stage nowadays. Once upon a time in Sovizzo, more or less at the same time of the fall of the Berlin [...]

22 March 2021

0